Checkout is handled by InterVac Design Corp at intervacdesign.com · 772.463.1400
Piped system

SeaVac Mini Pro

Model CS-RM

Hide the power unit. Keep the reach. Remote-mounted: the power unit lives in a dry locker and a pipe runs to an inlet valve and a VacPort in the cabin.

  • Power unit tucked away in a dry locker or cabinet
  • Starts on its own when you open an inlet valve or a VacPort
  • Takes the Y11 double-opening bag

Best for: Cabins where you want the machine out of sight and a sweep-in VacPort at the companionway. Takes the Y11-5 dust bag.

Buy options Compare all four
SeaVac Mini Pro, model CS-RM

Shown as it ships: the SeaVac Mini Pro is InterVac’s model CS-RM, and the power unit carries the RoadVac name on its front panel. Same unit, same bag, same parts.

Dry use only.

Cabin use only. Mount the power unit in a dry compartment and never vacuum water, bilge water or anything wet. Read the dry-use rule.

Buy

Replacement unit, or the complete system.

Buy the bare power unit to swap out a failed one, or the full system with everything the install needs.

Replacement power unit only

$207.12

The power unit on its own. For replacing a failed unit where the pipe, valve and VacPort are already installed.

Buy this unit

Checkout is handled by InterVac Design Corp at intervacdesign.com

Complete system — black

$390.00

Power unit, fittings, a black inlet valve and a black VacPort — everything the install needs, in one box.

Buy this system

Checkout is handled by InterVac Design Corp at intervacdesign.com

Complete system — white

$390.00

Power unit, fittings, a white inlet valve and a white VacPort — everything the install needs, in one box.

Buy this system

Checkout is handled by InterVac Design Corp at intervacdesign.com

SeaVac Mini Pro specifics

What makes this one different

Model numberCS-RM
InstallationRemote mounted, dual inlet
OperationAutomatic — starts when a valve or VacPort opens
Front utility inletYes
Inlet valveIncluded in the complete system
VacPort compatibleYes — automatic
Circuit boardYes
Dust bagY11, double opening
Motor filterY22
Unit weight4 lbs

Two ways to pick up dirt. The SeaVac Mini Pro is piped, so it takes both: an inlet valve is where the hose plugs in, and a VacPort replaces the dust pan — open its door, the vacuum starts, and you sweep the dirt straight in. VacPorts · Inlet valves and fittings

Full specifications

The SeaVac Mini Pro in full

Water lift and airflow are each published twice: sealed and max are measured with the airway closed and fully open; working figures under a normal cleaning load.
Air watts414
Water lift92 in. sealed / 52 in. working
Airflow107 CFM max / 38 CFM working load
Motor1,200 watts
Current draw12A at 60Hz / 5.9A at 50Hz
Power source110V or 220V AC (240V single phase on request)
Sound level74.6 dB
Bag capacity0.5 gallon
FiltrationHEPA type, sealed dust bag
CoverageUp to 900 sq. ft.
Hose35+ ft stretch hose
CertificationsUL, CE and UKCA
Owner’s manualM-10
Warranty2 years on the unit, 30 days on accessories

Consumables

The Y11 bag is the one that seals.

The SeaVac Mini Pro takes the Y11-5 — five bags and one motor filter. Change the motor filter after every fifth bag, which is why one ships in every pack. Non-genuine bags and filters void the vacuum warranty.

Buy Y11-5 bags — $28.89 All bags & filters

No hose or tools aboard? That is normal. Plenty of boats get the vacuum fitted without the hose and tool kit, because the kit is sold separately. Nothing is wrong with the system — any 32 mm kit fits. Tool kits from $125.05.

Installed aboard

Out of sight, in a dry locker

An earlier SeaVac, wall-mounted. The RM-family unit the SeaVac Ultra is built on, fitted in a dry equipment space below deck. The SeaVac name is on the front.
An earlier SeaVac, wall-mountedThe RM-family unit the SeaVac Ultra is built on, fitted in a dry equipment space below deck. The SeaVac name is on the front.
In a teak cabinet. An earlier SeaVac in a locker with its own door. Close it and the power unit disappears into the joinery.
In a teak cabinetAn earlier SeaVac in a locker with its own door. Close it and the power unit disappears into the joinery.
Under a companionway step. An RM-family unit in the dry space under a hinged step, the kind of spot most boats already have.
Under a companionway stepAn RM-family unit in the dry space under a hinged step, the kind of spot most boats already have.

SeaVac Mini Pro questions

Common questions

Which dust bag fits the SeaVac Mini Pro?

The Y11-5. It is the Y11 bag in a pack of five with a motor filter. The other SeaVac bags look similar but will not seal in this unit, so check the model number on the collar before you order.

Can the SeaVac Mini Pro pick up water?

No. It is a dry vacuum for cabin use only. Never use it on water, bilge water, wet sand or anything damp, and mount the power unit in a dry compartment.

Can I put a VacPort on the SeaVac Mini Pro?

Yes. It is a piped system, so it takes the VacPort range in LED and non-LED, plus inlet valves.

What tool kit fits the SeaVac Mini Pro?

Any 32 mm kit — every kit InterVac sells. The TK108-B, TK108-TB and TK108-TBM all fit, as do the individual hoses, wands and tools.

Why does my SeaVac Mini Pro say RoadVac on the front?

The SeaVac Mini Pro is InterVac’s model CS-RM, the same power unit InterVac sells for RVs under the RoadVac name. It ships with that front panel. The bag, filters and parts are identical.

The rest of the range

The other SeaVacs